 |
|
|
| |
How to enter my Unlock Code on Alcatel?
Model : Method Generic
1 - Switch ON your phone without SIM Card,
2 - Then compose : *#0000*CODE#,
3 - To finish compose : *#0001*CODE#.
Model : 531 & 535
1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose 787292,
3 - A new menu "Unlock Network" will appear, then select "YES",
4 - Enter the Code we send to you.
Model : All other Alcatel
1 - Switch on your phone with a not allowed SIM Card,
2 - When the message "Enter Network Key" appear enter the Code we send to you
If the phone does NOT ask for the unlock code when you put in another simcard
you can enter the NCK in the following way:
###765*08#YOUR CODE.
How to enter my Unlock Code on BlackBerry?
Model : BlackBerry 8700.8800.8300.8320
You must have a SIM card in your phone to complete these steps ( Can be
active or inactive )
WARNING: The Wireless Mode MUST be OFF before performing the given SIM
Unlock instructions in order to avoid causing the device from becoming
defective.
How to turn Wireless Mode Off:
1. Scroll to (Turn Wireless Off.)
2. Press Select.
3. Wireless Mode will turn off.
How to Unlock the device:
1. On the Home screen, click the Tools icon ( Setting Menu ). The Options
screen appears.
2. In the Options screen, select "Advance options".
3. Scroll to "SIM Card" and select it. You should see the phone number and
the SIM ID number.
5. Press and Hold ALT key and Type MEPE
6. It will say "Enter Network MEP Code", then you type in the Unlock
code.
7. Press ENTER and reboot handheld.
8. Your phone is now unlocked
Model : BlackBerry 8100c 8100r 8100g 8100v Pearl
1 - This can be done with or without sim card.
2 - Go to Options Menu => Advanced Options.
3 - Go to Sim Card Menu
6 - Now Type MEPP2 (Press, and hold the ALT key while typing 2. you will not see anything on screen while typing. ALT key is beside * key, symbol like arrow key.)
7 You will see "Enter Network MEP code (number of attempts left will appear
in brackets).
8. Enter your Network MEP code (unlock code) than press enter.
10. You will see "Code Accepted."
11. You have permanently unlocked your BlackBerry.
12. Power off your BlackBerry, than insert your desired SIM card.
---------
Model : BlackBerry 8100 (Vodafone Australia)
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS
This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below
1. Take note of the unlocking code shown above
2. Insert a Non-Vodafone Australia working SIM card.
3. Ensure the phone is charged and then switch the phone on.
4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)
5. The phone will then display a message. The most common is “Invalid SIM card”. (Different message? See FAQ below)
6. Select “Turn Wireless Off”
7. Select “Settings” Menu , then go to Advanced Options > SIM Card
8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}
9. When prompted with “Enter Network MEP code (255 left)” on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above)
10. Reset the phone by pulling the battery
11. Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)
Please Note:
If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited to 255 tries only. When 255 attempts is reached the phone will be permanently blocked.
To unblock the phone, it must be taken to a RIM service centre. No outgoing calls including emergency call is possible when the phone is blocked.
FAQ:
Question: My phone asks to enter a PIN number
Answer: For SIM cards with PIN ENBLED you will be required to enter a PIN. This is not the unlocking code that has just been provided. For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card please read the manual that came with your phone. This is not a handset unlocking difficulty.
Question: My handset displays a different message then what is shown in this procedure when I insert a Non Vodafone Australia SIM card.
Answer: The most common message the phone will display is “Invalid SIM card”. Because each handset may have a different variation in software there is no common message. If your handset displays a different message it is recommended to move onto the next step. Note: Faulty SIM Cards - The handset may also display messages indicating the SIM you are using to unlock the handset is faulty, it could display “Insert SIM” “Bad Card”, “Card Error” or “Card Rejected”, confirm the SIM card is inserted correctly – Gold area downwards and the cut of the corner matches correctly. You will need a working Non Vodafone SIM card to unlock the handset, Vodafone can not assists with other networks faulty SIMs.
Question: I am outside of Australia and experiencing difficulties unlocking the phone that I purchased from a Vodafone Australia outlet
Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.
--------------------
Model : All BlackBerry
1 - Using the menu go to Settings Menu -> SIM card pressselect.
2 - While holding the SHIFT key, type mepd
3 - You should now see the five locking categories listed.
4 - While holding the SHIFT KEY, type mep2.
5 - Release the shift key.
6 - You are now prompted to enter the Network MEP code (it will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked
How to enter my Unlock Code on Cingular BlackJack ?
Insert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted
NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
Power on your Phone
1. Enter *#1546792*#
2. Select Option 3 Network & Call Settings
3. Select option 5 Network Mode
4. Select GSM
This should resolve your problem.
Instructionsn <style type="text/css">n<!--n.style1 {color: #666666}nli.MsoNormal {margin:0in;nmargin-bottom:.0001pt;nfont-size:12.0pt;nfont-family:"Times New Roman";n}n-->n</style>n<style type="text/css">n<!--np.MsoNormal {nmargin:0in;nmargin-bottom:.0001pt;nfont-size:12.0pt;nfont-family:"Times New Roman";n}n-->n</style>nn n n | n Unlocking Instructions for Toshiba G450
n
n How to insert the Unlock CODE into your Toshiba G450
n
n n - Insert a not accepted SIM Card and turn ON your Toshiba G450.
n
n - Enter the Unlock Code you received from UnlockallCellular.com
n
n - Your Toshiba G450 is now unlocked!
n
n OR n - Insert a not accepted SIM Card and turn ON your Toshiba G450.
n
n - The display will show “Enter Network Unlock CODE ”.
n
n - Enter **00012* then 47369761 followed by Unlock CODE# provided by UnlockallCellular.com then press the center menu key.
n
n - The display will now show “Done”.
n
n - Switch your Toshiba G450 OFF and ON.
n
n - Your Toshiba G450 is now unlocked!
|
|
| |
|
|
|
|
|
 |
|
|
